AmigaMUD, Copyright 1995 by Chris Gray Programming in the AmigaMUD System Introduction The AmigaMUD system contains a complete programming system for a structured programming language. This language is used to program any MUD scenarios, quests, puzzles, etc. The AmigaMUD system contains facilities for parsing, executing, storing, retrieving and pretty- printing code in the language. Although intended for writing MUD scenarios, the language can easily be used for other purposes. Although the interpreter is reasonably efficient, it is by no means as fast as true compiled code. Programmers should keep this in mind when using the language - things that are practical in, say, C, may not be practical in AmigaMUD. AmigaMUD programming is accessed though one of the client programs, just like playing a scenario is. Only characters with status 'wizard' or 'apprentice' can directly access the programming features. Characters enabled as builders can indirectly access them by writing actions as described in the building document. The AmigaMUD programming language does not contain any language constructs for doing input/output, graphics, sound, etc. Instead, the system contains a large number of builtin functions which perform these activities. Other builtin functions perform utility operations such as returning the length of a string, taking a substring, returning the current time and date, etc. Most AmigaMUD programming involves writing functions. These functions are stored in the system database and are automatically retrieved as needed (e.g. to call them or print them out). AmigaMUD functions can have parameters and can return a result. They can also be recursive, although this is quite rare in a MUD scenario. All AmigaMUD code executes in the server program, MUDServ, on the host computer. Lexical scanning, parsing, and editing all happen on the client computers. Parsed functions are sent from the client to the server as a "compiled" bytestream. Pretty-printing is done on the host computer, and the results are sent to the client as text. Because the server computer can never wait for any client (the human player might get a phone call in the middle of typing in a function!), some operations, such as input, are done differently than in other languages. When using the standard scenario, a wizard or apprentice can go into programming, or wizard mode, by typing the 'wizard' command. The prompt will change to "> ". In this mode, input typed in is assumed to be statements in the programming language, definitions of functions, or one of a few simple wizard-mode commands. For reference, a statement to get out of wizard mode consists of: Normal(). This, of course, is only valid when the prompt is "> ", i.e. when no partial statement has been entered, and the user is not in the middle of typing in a function definition. If the input statement does not fit on a single line, it can be continued on as many lines as needed. On lines other than the first, the prompt will change to ": ". The input statement is ended with a period, as in the above example. If the input statement is in fact an expression, i.e. it returns a value, then the system will print out that value. For example: > 2 + 3. ==> 5 Not all values can be printed in any meaningful way. Function and thing (database entity) values are printed either symbolically (if the system can find a symbol for them) or as a hexadecimal number. Each input line entered by any user is subject to an execution time limit, which can be controlled by the MUD administrator (SysAdmin). Running out of time will result in the execution being stopped, and a traceback of the called functions being produced. Other run-time errors, such as dividing by zero, produce a similar abort and traceback. The following sections of this document give some examples of AmigaMUD programming. It is assumed that the reader already knows something about programming, or is a fast learner - this document does not try to teach programming to a novice. Readers are not expected to fully understand these examples - they are just a random sampling to show the flavour of AmigaMUD programming. Example - the Towers of Hanoi Here is a log of entering, printing and running the classic "Towers of Hanoi" function. Commentary is separated off and enclosed in square brackets. For those not familiar with this computer programming classic, the story goes something like this: There is a monastery near Hanoi where there live a group of monks dedicated to keeping the universe running. They do this by continually moving flat disks around on a set of three pegs. The disks are round, and have a hole in the middle so that they can slide onto the pegs. At the beginning of the universe, all 64 disks were on the left-most peg, with the widest disk on the bottom, and the narrowest one on the top. When the monks have succeeded in moving all of the disks to the right-hand peg, the universe will end. They can only move one disk at a time, and must never place a wider disk on top of a narrower one. The monks must move the disks as fast as they can. input> wizard [I was initially in normal playing mode. I used the 'wizard' command to get into wizard mode so I can program.] > private proc hanoi(int n; string from, to, using)void: *** expecting identifier for proc parameter name *** expecting ',', ';' or ')' after proc parameter : . *** expecting 'corp' to end proc definition Errors detected, proc "hanoi" not created. [I accidentally tried to use a reserved word as a parameter name. I decided to abort the entering of the function by typing a '.'. This doesn't always work - sometimes closing parentheses or constructs are also needed. Note that the prompt changed to ": " while I was entering the function definition.] > private proc hanoi(int n; string fromStr, toStr, usingStr)void: Postman has arrived from the north. : if n ~= 0 then Postman heads into the passageway. : hanoi(n - 1, fromStr, usingStr, toStr); : Print("Move disk " + IntToString(n) + " from " + fromStr + " peg to " + : toStr + " peg.\n"); : hanoi(n - 1, usingStr, toStr, fromStr); : fi; : corp [Being in wizard mode doesn't take your character out of the scenario, hence I still saw messages about Postman passing through. It is often wise to go somewhere private when doing serious wizarding, so that you aren't interrupted.] > describe hanoi. hanoi: proc, owner Merlin, useCount 2: proc hanoi(int n; string fromStr, toStr, usingStr)void: if n ~= 0 then hanoi(n - 1, fromStr, usingStr, toStr); Print("Move disk " + IntToString(n) + " from " + fromStr + " peg to " + toStr + " peg.\n"); hanoi(n - 1, usingStr, toStr, fromStr); fi; corp [The exact form in which I entered the function is not preserved. The function is stored internally as a byte stream, and is "pretty-printed" by the system as needed. I used the 'describe' wizard-mode command to display the function.] > hanoi(0, "left", "right", "center"). [Now I call the function. This is a directly entered statement in the programming language. With 'n' equal to 0, the function does nothing, and, since it returns nothing ("void"), nothing is printed.] > hanoi(1, "left", "right", "center"). Move disk 1 from left peg to right peg. [With 'n' equal to 1, there is one line of output.] > hanoi(2, "left", "right", "center"). Move disk 1 from left peg to center peg. Move disk 2 from left peg to right peg. Move disk 1 from center peg to right peg. > hanoi(3, "left", "right", "center"). Move disk 1 from left peg to right peg. Move disk 2 from left peg to center peg. Move disk 1 from right peg to center peg. Move disk 3 from left peg to right peg. Move disk 1 from center peg to left peg. Move disk 2 from center peg to right peg. Move disk 1 from left peg to right peg. [The number of lines of output is equal to 2 to the power of 'n', minus one. Thus, we need not fear for the imminent end of the world. Even if the monks can move one disk per second, the time needed to complete the task, 2 to the power of 64, minus one, is a very long time indeed!] > Normal(). input> bye [I go back into normal mode, and exit.] Example - Code to Draw the Streets Area define tp_streets proc drawStreets()void: if not KnowsEffect(nil, STREETS_ID) then DefineEffect(nil, STREETS_ID); GSetImage(nil, "streets"); IfFound(nil); GShowImage(nil, "", 0, 0, 160, 100, 0, 0); Else(nil); GSetPen(nil, C_DARK_GREY); GAMove(nil, 0, 0); GRectangle(nil, 159, 99, true); GSetPen(nil, C_LIGHT_GREY); GAMove(nil, 0, 0); GRectangle(nil, 69, 41, true); GAMove(nil, 89, 0); GRectangle(nil, 70, 41, true); GAMove(nil, 0, 57); GRectangle(nil, 69, 42, true); GAMove(nil, 89, 57); GRectangle(nil, 70, 42, true); GSetPen(nil, C_DARK_BROWN); GAMove(nil, 0, 0); GRectangle(nil, 62, 35, true); GAMove(nil, 96, 0); GRectangle(nil, 63, 35, true); GAMove(nil, 0, 63); GRectangle(nil, 62, 36, true); GSetPen(nil, C_WHITE); GAMove(nil, 79, 0); GRDraw(nil, 0, 35); GAMove(nil, 0, 49); GRDraw(nil, 62, 0); GAMove(nil, 97, 49); GRDraw(nil, 62, 0); GAMove(nil, 79, 63); GRDraw(nil, 0, 36); GSetPen(nil, C_BLACK); GAMove(nil, 62, 13); VerticalDoor(); GAMove(nil, 96, 1); VerticalDoor(); GAMove(nil, 96, 13); VerticalDoor(); GAMove(nil, 96, 25); VerticalDoor(); GAMove(nil, 101, 35); HorizontalDoor(); GAMove(nil, 122, 35); HorizontalDoor(); GAMove(nil, 143, 35); HorizontalDoor(); GAMove(nil, 62, 65); VerticalDoor(); GAMove(nil, 62, 77); VerticalDoor(); GAMove(nil, 62, 89); VerticalDoor(); GAMove(nil, 5, 63); HorizontalDoor(); GAMove(nil, 26, 63); HorizontalDoor(); GAMove(nil, 47, 63); HorizontalDoor(); GSetPen(nil, C_LIGHT_GREEN); GAMove(nil, 96, 63); GRectangle(nil, 56, 30, true); GSetPen(nil, C_LIGHT_GREY); GAMove(nil, 121, 63); GRectangle(nil, 5, 36, true); GAMove(nil, 111, 69); GRectangle(nil, 25, 18, true); GSetPen(nil, C_BLUE); GAMove(nil, 118, 74); GRectangle(nil, 11, 8, true); GSetPen(nil, C_GOLD); GAMove(nil, 123, 78); GCircle(nil, 1, true); GAMove(nil, 124, 78); GCircle(nil, 1, true); GSetPen(nil, C_DARK_BROWN); GAMove(nil, 103, 72); GRectangle(nil, 7, 12, true); GAMove(nil, 137, 72); GRectangle(nil, 8, 12, true); GSetPen(nil, C_BLACK); GAMove(nil, 110, 74); VerticalDoor(); GAMove(nil, 137, 74); VerticalDoor(); GSetPen(nil, C_FOREST_GREEN); GAMove(nil, 100, 67); GCircle(nil, 5, true); GAMove(nil, 135, 67); GCircle(nil, 4, true); GAMove(nil, 145, 68); GCircle(nil, 5, true); GAMove(nil, 114, 91); GCircle(nil, 3, true); GAMove(nil, 107, 90); GCircle(nil, 3, true); GAMove(nil, 99, 91); GCircle(nil, 3, true); GAMove(nil, 149, 80); GCircle(nil, 3, true); GAMove(nil, 148, 87); GCircle(nil, 3, true); GAMove(nil, 142, 91); GCircle(nil, 3, true); GAMove(nil, 133, 90); GCircle(nil, 3, true); Fi(nil); EndEffect(); fi; CallEffect(nil, STREETS_ID); corp; Recall from earlier documents that the "MUD" client program can cache effects, such as the graphics for the streets area. The server program keeps track of which active clients currently know which effects. The code here is asking the server if the current client knows the effect identified by 'STREETS_ID'. If it doesn't, then that effect is defined. The effect is actually like a little program itself. A graphics image called "streets" is requested. If it is found on the client machine, then it is shown, otherwise a rough rendering of the image is produced using rectangles, lines, circles, etc. Note that this decision is made in the client program, since the server cannot wait for the result of that decision. The rough drawing of the streets area can be summarized as: - fill the entire image area with dark grey - draw four rectangles of light grey as sidewalks - draw three smaller rectangles of dark brown as the buildings - draw lines of white down the middle of the roads - draw a bunch of black doors. 'VerticalDoor' and 'HorizontalDoor' are scenario functions which in turn use effects to draw the standard vertical and horizontal doors. - draw a light green rectangle to be the body of the park - draw a pair of overlapping light grey rectangles to be the sidewalks in the park - draw the blue fountain with the gold mermaid in it - draw two dark brown buildings with black doors - draw a bunch of forest green trees After the STREETS_ID effect is defined (if it wasn't already), it is called up. The result of all of this is that the first time a client program needs to draw this area, there is a pause as the effect code is sent from the server. On subsequent uses, however, the server knows that the client knows the effect, so only a short request to run it is sent over. Example - Code for the 'Inventory' Verb define tp_verbs proc v_inventory()bool: int cash; thing me; me := Me(); cash := me@p_pMoney; if cash = 0 then Print("You are broke.\n"); else Print("You have "); IPrint(cash); if cash = 1 then Print(" bluto.\n"); else Print(" blutos.\n"); fi; fi; if ShowList(me@p_pCarrying, "You are carrying:\n") then Print("You are not carrying anything.\n"); fi; if not me@p_pHidden and CanSee(Here(), me) then OPrint(FormatName(me@p_pName) + " takes inventory.\n"); fi; true corp; Verb0(G, "inventory", 0, v_inventory). Synonym(G, "inventory", "inv"). Synonym(G, "inventory", "i"). This routine returns a 'bool' (true/false) value, like other direct parsing routines. This is done so that if an error is encountered, the system can abort the handling of user input which contains several commands on one line, such as: go north. go east. west. get rope. go south. tie rope to rail If such a parsing routine returns 'false', then the successive commands on the same line are not executed. In the case of 'inventory', there is nothing that can go wrong, so the function always returns 'true'. This function has some local variables. They are valid only while the function is executing, and do not have to have names unique from local variables in other functions. First, a local copy of the pointer to the current character, as yielded by calling the builtin "Me", is created. This is done since it is quicker to reference a local variable than to call a function. Next, the amount of money the character has is obtained. The '@' operator takes a 'thing' on the left and a property on the right, and returns the value of that property attached to the thing. Much more will be said about this later. The function then prints out an appropriate comment based on that amount. Next, it calls "ShowList", which is another routine in the scenario which prints the names of objects in a list, one per line, slightly indented. It is used here, when describing a room, and when looking inside a container. If the list is empty, it does not print anything, and returns 'true'. If the list is not empty, it prints its second parameter (here "You are carrying:\n") before printing the items in the list, and then returns 'false'. Thus, the code here will either print the list of objects the character is carrying (property 'p_pCarrying' on the character) headed by "You are carrying:\n", or will print "You are not carrying anything.\n" if the character is empty-handed. The next 'if' statement is a bit more complicated. It's purpose is to allow other characters in the same room as the one doing the inventory to see what the first is doing, if appropriate. A character can be "hidden" (only wizards can do this in the current scenario), so that others cannot see them or what they are doing. 'CanSee' is another routine in the scenario, that determines whether or not there is light in the given room. There will be no light if the room is dark, no object in the room is emitting light, no character in the room is emitting light (wizards can make themselves glow), and no character in the room is carrying an object which is emitting light. 'OPrint' is a builtin function which displays the passed string to all characters in the same room as the active one. 'FormatName' is a builtin function which reformats a string from the AmigaMUD internal form into a more normal external form (e.g. turns "frog;small,green" into "small green frog"). Thus, if the active player is not a hidden wizard, and there is light in the current room, then all players in the current room will see the message "XXX takes inventory.\n", where XXX is the character's name. The three lines after the function definition are directly executed statements which add the verbs "inventory", "inv" and "i" to the main grammar, as abbreviated by 'G'. 'Verb0' tells the system that there are no arguments expected for the verb. Other possibilities are 'Verb1' as in "examine " and 'Verb2' as in "put the into the ". The main grammar, G, is the one which is used to parse normal user commands when not in wizard mode. Other grammars are used for the building commands, etc. More details on parsing will be given later. Example - Code for the 'ShowList' Utility Routine define t_util proc utility public ShowList(list thing lt; string starter)bool: int i; thing object; string s; bool first; first := true; for i from 0 upto Count(lt) - 1 do object := lt[i]; if not object@p_oInvisible then if first then first := false; Print(starter); fi; Print(" " + FormatName(object@p_oName) + "\n"); fi; od; first corp; A list in AmigaMUD can be indexed like a one-dimensional array. The builtin 'Count' takes any kind of list as its argument, and returns the number of elements in it. This routine simply runs down the elements in the passed list, and looks for any objects that are not marked as invisible. It prints each such one out, indented by two spaces, after the header passed by the caller. If no visible objects were found, 'ShowList' returns true, else it returns false. Example - the Code for Killing a Monster define t_fight proc KillMonster(thing monster)void: string monsterName; thing me, here; list thing lt; int i; me := Me(); monsterName := FormatName(monster@p_pName); Print(monsterName + " is killed!\n"); if me@p_pHidden then OPrint(monsterName + " is killed!\n"); else OPrint(FormatName(me@p_pName) + " kills " + monsterName + "!\n"); fi; me -- p_pCurrentTarget; lt := monster@p_pCarrying; if lt ~= nil then here := Here(); i := Count(lt); while i ~= 0 do i := i - 1; ignore DoDrop(here, monster, lt[i]); od; fi; if monster ~= me then i := monster@p_pMoney; if i ~= 0 then FindLoot((i + 1) / 2 + Random((i + 1) / 2)); fi; fi; ignore ForceAction(monster, DoUnShowIcon); corp; This routine is executed whenever a character in the combat area (the "Proving Grounds") successfully vanquishes a monster. The routine prints informative messages to the player and anyone else around, causes all of the monster's possessions to be dropped, and gives the character a possible monetary reward. The final line of the function needs a bit more explaining. The builtin function 'ForceAction' forces the indicated character or NPC to execute the function passed as the second argument. This means that any code that affects "everyone else in the room" will also affect whoever is killing the monster. In this case, the routine called is responsible for removing the icon for the monster from the displays of everyone else in the room. Wizard-Mode Commands Most input entered while in wizard mode is either function definitions or statements in the programming language to be directly executed. A few special commands are available for convenience, however. They are: END-OF-FILE - an end-of-file condition will cause the client to exit. bye - this command will cause the client to exit. Note that the server keeps track of whether a character is in wizard mode or not, so on the next connection, it will enter wizard mode if that is the mode the character was last in. When not in wizard mode, special scenario actions can be taken when a character exits the game and when the character re-enters the game. These are not performed when in wizard mode. Thus, things like the initial display of the current location will not happen automatically, and it may be necessary to look around and/or move around to get it to appear. public private define/def - these three commands are used to define a symbol. 'public' will put the symbol into the global public symbol table. 'private' will put the symbol into your private symbol table, and 'define' will put the symbol into whatever table you specify. There are two kinds of symbol definitions that can be made. The first kind consists of a name for the symbol followed by the definition of it, followed by a period. Examples: public G CreateGrammar(). public p_pName CreateStringProp(). private HIT_LIMIT 72. private room_table CreateTable(). define room_table westRoom CreateThing(genericRoom). define room_table eastRoom CreateThing(genericRoom). The second kind of symbol definition defines a function. This is done by using the reserved word 'proc' followed by the function definition. See the previous example sections for some of these. They will be discussed in more detail later. delete/del - this command will delete the given symbol from the given table, if it can. It is similar to running the 'DeleteSymbol' builtin. can be "private" or "public" as well as the name of a table. use - this command adds the specified symbol table to the set of currently in-use tables. It is equivalent to calling the 'UseTable' builtin. See the discussion of tables in the 'Building' document. unuse - this command removes the specified symbol table from the set of currently in-use tables. It is equivalent to calling the 'UnUseTable' builtin. source - this command causes the contents of the named file (on the client machine) to be read and processed. Files sourced in this way can in turn contain other 'source' commands. Doing this allows a large scenario to be split up into a number of logical (and smaller) pieces. The filename can be any legal AmigaDOS file path. Examples: source st:all.m source df0:AmigaMUD/examples/speech.m When using the "MUD" client program, the 'Source' menu item is equivalent to the 'source' command. Do not try to switch between wizard mode and normal mode while sourcing files, however, since the operation is asynchronous and will probably not occur when you want it to. describe/desc/d . - this command prints out information about the value of the requested expression. It is the wizard mode command most often used interactively. The output will depend on the type of the expression: void - a void value, i.e. no value, is printed as '' status - a status value is printed symbolically, as 'succeed', 'continue' or 'fail' character - output for a character value is quite lengthy. It consists of: - the character's sponsor - this is the character who promoted this character to its current status, if any. - the character's current location. This will be the name of the location (room) the character is in, if that room has a name, and a table containing that name is in-use. Otherwise it will just be ''. - the character's input action. This is the action that all non-wizard-mode text input from the player is passed to. It is normally some general scenario parsing routine. The output will be the name of the function if a table containing that function is in-use, otherwise it will be ''. - the character's raw key action. This is the action which is called to process raw key events occuring when the player hits a special key, such as 'HELP', or a numeric keypad key. - the character's mouse down action. This is the action which is called to process left-mouse- button hits over identified regions of the graphics window. - the character's button action. This is the action which is called to process button hits done with the mouse. Button-hits are clicks on scenario-created "mouse-buttons" in the graphics window. - the character's idle action. This is the action which is called when the player leaves the game when not in wizard mode. - the character's active action. This is the action which is called when the player re- enters the game not in wizard mode. It is often used to do a 'look around' to establish the display for the current location. - the character's status. This is one of: - normal - apprentice - wizard - the character's usecount. This indicates the number of references to the character data structure currently contained in the database. The character cannot be deleted if this number is non-zero. There will always be a reference to the character from the 'Characters' symbol table, and there will be another one resulting from executing this command, and those two do not count towards the total, but do show up. - the character's current non-wizard-mode prompt - the character's current password. This will only be displayed for SysAdmin. - if the character is currently in wizard mode, then '(in wizard mode)' is displayed - if the character is a new character, i.e. has not yet connected and been initialized, then '(new player)'. - the character's "thing" is displayed. This is where all other changeable properties of the character are stored. See the section here on thing output for details. bool - a boolean value is printed as 'true' or 'false' int - an integer value is printed in decimal string - a string value is printed in quotes, with special characters escaped as in source form thing - the output for a thing consists of a header section, showing the fixed values that make up a thing, followed by some number of property-value pairs which are the contents of the thing. The fixed header contains: - the thing's parent. This is the thing which this thing starts inheriting properties from. - the thing's owner. This is the character who currently owns the thing. When a thing is created, it's owner is the effective character at the time. - the thing's usecount. This is the number of references to the thing from other entities in the database. If this count goes to zero, then the thing can be destroyed. - the thing's property count. This is the count of the number of properties attached to the thing. This does not count any properties that may be inherited from ancestors. - the thing's status. This is one of: ts_private - only the owner of the thing can examine or change it ts_readonly - only the owner of the thing can change it, but anyone can examine it ts_wizard - any character with wizard status (or code running with that status) can change the thing, and anyone can examine the thing ts_public - anyone can change or examine the thing The contents of the thing, i.e. its properties, are then displayed, indented two spaces. Each property consists of the property, a colon and the value of that property. If the property is defined in any in- use table, then the name of the property is printed, otherwise '' is printed. The value of the property is printed much as being described here, except that things are not shown expanded, but are shown as a name, if one is found in an in-use table, or as ''. Note that properties not known to the current character are not displayed, unless the current character is SysAdmin. Thus, adding more tables to the "in-use" list can cause more properties to be displayed on things. However, if a property is not publically exported by the wizard who created it, only that wizard and SysAdmin can see its value. action - actions, or functions, or procedures, are printed with a short header describing the action. This header contains: - the owner of the function. This is the character who defined it. - the usecount of the function. An action cannot be deleted unless this count goes to zero. Following this header is the definition of the function, as pretty-printed by the system. For builtin functions, which are pre-implemented, no function body is shown. Also, if the owner of the function has made it available in some public symbol table, but has not marked the function itself as "public", the body is not shown, unless it is SysAdmin who is looking. See a later section on "Declarations" for an explanation of the syntax of functions. table - only a header is printed for a table. The symbols in the table can be displayed using the 'ShowTable' builtin. The header for a table contains: - the owner of the table - the usecount of the table - the number of entries in the table grammar - a grammar is described much the same as a table. The words in the grammar can be displayed using the 'ShowWords' builtin. The header for a grammar contains: - the owner of the grammar - the usecount of the grammar - the number of words in the grammar lists - AmigaMUD has three kinds of lists: lists of integers, lists of things, and lists of actions. Each is displayed as a list of values enclosed in braces. Integers are shown directly in decimal, and things and actions are shown as a symbol, if one is found in the in-use tables, or as '' or ''. properties - properties are displayed symbolically if a symbol for them is found in the set of in-use tables, or just as ''. thing-status - a thing status (as returned by the builtin 'GetThingStatus') is displayed as one of: ts_private ts_readonly ts_wizard ts_public edit/ed/e - this command is used to interactively edit a function. Only the body of a function can be changed - its header can only be changed by deleting the function and recreating it. Editing can only be done when using the "MUD" client program, either locally or remotely, or when using the "SMUD" client program locally. "SMUD" will always use an external editor, as indicated by your "EDITOR" environment variable, and "MUD" will use either an internal one or an external one, depending on the "Editor" menu setting. See the "MUD" document for details on how to use the internal editor. When the editing is done, the AmigaMUD programming language parser attempts to "compile" the function. This can fail, because of syntax or other errors, in which case the function is left unchanged. With the "MUD" internal editor, the errors are pointed out one at a time and the user can resubmit the function at any point. When using an external editor, the user can re-issue the 'edit' command, without giving a function name, and will be left editing the file as it was when it was submitted for compiling. This cycle can be repeated until the function compiles, or the user gives up. replace - this command can be used, even when not using the "MUD" or "SMUD" client programs, to change the body of a function. The entire function must be re- entered, including its header. E.g. > private proc doit()void: : Print("Hello\n"); : corp; > > replace doit()void: : int i; : for i from 1 upto 10 do : Print("i = " + IntToString(i) + "\n"); : od; : corp; > This kind of editing is expected to be most useful in conjunction with a terminal program which can do an ASCII-put from a file on the remote machine. As with function editing, the header of the function cannot be changed. Data Types There are a number of data types in the AmigaMUD programming language. Not all are useable in all circumstances. The types are: void - this is not really a type. It is used as a function return type to indicate that the function does not return a value (and hence is actually a procedure and not a function). It is also the type returned by statements, such as a 'for' loop. nil - this also is not really a type. It is the type of the reserved word 'nil', which represents a non-value for things, actions, tables, grammars and lists. This allows values of those types to be tested for validity. No other use of this type can occur. status - this type is a three-valued type, with values 'succeed', 'fail' and 'continue'. The interpretation of these three values is at the discretion of the programmer, but a number of builtin functions, such as 'FindName', return status values with fixed interpretations on the values. It is suggested that programmers use similar interpretations to avoid confusion: 'succeed' - the operation has completed successfully 'fail' - the operation has failed 'continue' - the operation can be continued character - this type represents a reference to a player character. It is used by a few builtin functions, such as 'Owner', 'Character', etc. Such a reference is not equivalent to a reference to the character thing, such as is returned by the 'Me' builtin. Builtins 'CharacterThing' and 'ThingCharacter' can be used to return one from the other. bool - this type is a two-valued type, with values 'true' and 'false'. It is the result of a comparison, and is the required type for the condition in an 'if' construct or 'while' statement. It is also used with the parsing builtins. int - this type is a signed 32 bit integer. In the programming language, integers can be entered in decimal, hexadecimal, octal, or binary. Only decimal conversions are provided as builtins. string - this type represents a character string. The current implementation limits strings to about 4000 characters in length. Empty strings are allowed. In the programming language, strings are surrounded by quotation marks (") and may contain escapes for some non-printable characters. thing - this type represents a pointer to a thing. Things are the basic database entity used to represent concepts such as rooms and objects. There is a thing associated with each player character or NPC. To the programmer, a thing is just a set of attribute-value pairs. The attributes are properties defined in the database by programmers, and their values can be actions (functions), strings, integers, references to other things, etc. Each thing also has an owner (the character who currently owns it), and a parent (the thing, if any, to inherit other properties from). action - actions are just functions or procedures. In AmigaMUD they are first-class objects in that they can be stored in the database, passed as parameters, and called indirectly. When a function is called directly by another, the types and number of the parameters and result are checked during the compilation of the calling function. When a function is called indirectly at runtime, this checking must be done dynamically, after the called function has been identified. Thus, there can be function-calling errors at runtime. Also, several builtins take actions as parameters, and they check the parameters and result of such actions at runtime. table - a table is a symbol table. It is a mapping from strings (the symbols) to their values. Such tables are dynamic entities and can be created, manipulated and destroyed at runtime. They are stored in the database along with things, properties, actions, etc. Since tables are values, it is possible to have a symbol in a table whose value is another table. This allows the construction of trees of symbol tables, which is quite useful when organizing a large number of symbols. grammar - a grammar is much like a table, in that it contains a mapping from strings to values. In a grammar, however, the values are special internal ones which the AmigaMUD system can use to parse player input. The use of grammars is described in the section on parsing. list int list thing list action - lists in AmigaMUD are somewhat of a cross between linked lists and arrays. The size of them is dynamic, and there are builtins to add and remove elements from both ends. Their elements can be retrieved and modified by direct indexing. Such indexing cannot extend the size of the list, however. property bool property int property string property thing property action property table property grammar property list int property list thing property list action - properties in AmigaMUD are the identifiers for attribute-value pairs attached to things. The properties are themselves first-class objects, however, so they can be passed to functions as parameters, and returned as results. Note that only certain types can be attached to things in attribute-value pairs. - this type is not a full type in the language. It has values 'ts_private', 'ts_readonly', 'ts_wizard' and 'ts_public'. It is only used as the result type of the builtin 'GetThingStatus' and the parameter to 'SetThingStatus'. A few other types exist internally, but they are not generally visible to the programmer. Lexical Entities The bottom-level sequences of characters that are known by a programming language are called the tokens or lexemes of that language. In the AmigaMUD programming language, spaces, tabs and newlines are used to separate tokens that would otherwise appear to be single tokens, but are otherwise ignored. In other words, the system does not care, or even notice, what kind of indentation you use. There are two kinds of comments in the language. One is the C-like form consisting of characters enclosed within an opening "/*" and a closing "*/". Unlike C, however, this kind of comment can be nested in AmigaMUD, so that you can comment out a piece of code without worrying about whether it has comments inside it. These comments are discarded very early in the compilation process, so they do not affect runtime at all. The second kind of comment is the 'note' statement. These are actually stored in the database and displayed when the function containing them is printed out. They also slow down execution of functions containing them by a very small amount. Newlines are normally ignored when you are in wizard mode. They are significant, however, when typing wizard mode commands which accept something other than a period-terminated expression as their parameter. For example, entering just 'source' as an input line in wizard mode will yield an error message about a missing file name. The reserved words in the AmigaMUD programming language (those symbols that cannot be used as regular identifiers by programmers) are: and, or, not, if, then, elif, else, fi, while, do, od, for, from, upto, case, incase, default, esac, ignore, call, note, proc, utility, wizard, public, corp, void, bool, int, string, thing, status, grammar, character, table, action, list, property, true, false, succeed, fail, continue, nil, ts_private, ts_readonly, ts_wizard, ts_public Identifiers (user symbols) look like reserved words, but they aren't give any predefined meaning by the system. They can be of any length, and are composed of letters, digits and underscores. They must not start with a digit. The following are legal identifiers: Fred ThisIsALongIdentifier so_is_this_one fazz_79 x3 Integers (numbers) can be entered in several forms in the AmigaMUD programming language. The normal form is decimal (base 10). A number can be prefixed with '0x' for hexadecimal (base 16) interpretation, '0o' for octal (base 8) interpretation or '0b' for binary (base 2) interpretation. The following are all valid integer constants: 1234567890 0xcaf4A 0o777 0b1010101010001010111 Integers are signed 32 bit quantities in AmigaMUD. Minus signs are not part of integer constants - they are unary operators that can be applied to them. Thus x := -13; is perfectly legal - '-13' is interpreted as the unary '-' operator and the integer constant 13. String constants in AmigaMUD are similar to those in most programming languages. They consist of any number of any characters enclosed in quotation marks ("). Quotation marks and some unprintable characters can be put inside string constants using an escape mechanism. Inside a string, a backslash (\) is handled specially, depending on the character following the backslash, as follows: \n - a newline character appears in the string \t - a tab character appears in the string \X, where X is any other character - a single X appears in the string. This is how backslashes and quotation marks can be put in string constants. An important feature of string constants is the concept of a string break. Two string constants, separated only by whitespace and /* */ comments, are concatenated together into one string constant. This is done at "compile" time, and the internal representation used will be that of a single string constant. When a function containing a long string constant is printed, the string constant will be broken up using string breaks in order to fit on the output lines. Such long string constants are most often used in output messages, as in: Print("As you open the small wooden door, you detect a strange " "odour coming from the room beyond. The odour seems " "familiar, and you are about to identify it when you fall " "unconscious."); The following operator and punctuation tokens are also recognized: . used to end input in wizard mode = simple equality test for various types == case ignoring comparison for strings ~ bitwise invert ~= simple inequality test for various types < <= > >= comparison tests for integers and strings << >> bitwise shift operators >< bitwise exclusive-or operator : punctuation in function headers, after the result type := assignment construct + addition and string concatenation operator -- property deletion operator - * / % integer arithmetic operators & | integer bitwise operators ( ) parentheses for subexpressions, function calls, etc. , ; separators for expressions and statements @ property lookup operator [ ] brackets for list indexing Declarations The term "declaration" in the AmigaMUD programming language includes the declaration and definition of functions, and the declarations of local variables inside a function. AmigaMUD does not have global variables - you must use properties attached to things instead. Several examples of function (proc) definitions have already been seen as examples. They consist of: - 'proc' - - - - - '(' - - ')' - result type - - - 'corp' The 'utility'/'public'/'wizard' tokens can be given in any order. If the result type of the proc is 'void', then the , which is a semi-colon separated list of statements, must end in a statement. If the result type of the proc is not void, then the must end in an expression of that type. That expression will yield the result of the proc when the proc is executed. The is just a semi-colon separated list of declarations, indicating the names and types of the parameters that the proc will take when called. The list is empty if the proc has no parameters. Note that, unlike some languages, like Pascal, when calling a proc with no parameters, the parentheses must still be given. This allows the system to distinguish calling a proc from the use of the proc as a value (of type 'action'). A declaration of local variables or proc formal parameters consists of at type followed by a comma-separated list of identifiers, and a terminating semi-colon. Examples: int i, j, k; action a; property list int pli, l2prop; bool found, ok; 'void' is not a valid type for a variable or parameter. If a function is defined in a private table (one that is not available to other wizards and apprentices), then there is no way for others to look at it, unless it is attached to a thing as an action property, or added to a visible action list. This does not prevent others from executing it, however, such as when called by some other function. If the proc is visible to others, then can use the 'describe' command, or the DescribeSymbol builtin to look at it. Normally, however, they will only be able to see the proc header. If the owner adds 'public' when defining the function, then others will be able to see the full body of the function, printy-printed for them. Normally, when a function is called, the effective character and the effective status are set to be the owner of the function. This gives the function full access to properties, etc. owned by that character. Sometimes, however, especially when SysAdmin is writing functions, the setting of the effective state is not desired. In that case, the token 'utility' can be added to the declaration. This arranges things so that no change of effective character or status is done when the function is called. This avoids giving access to private properties, etc. The body of the function, however, must be careful to only use publicly accessible properties. If the token 'wizard' is added to a function definition, then the function can only be called when the effective character is a wizard. This allows wizards (and apprentices, although that isn't of much use) to write wizard-only functions, just like some of the builtin ones. Language Constructs A number of constructs in AmigaMUD accept a sequence of statements or an expression as a part of them. As in many programming languages, statements in a sequence of statements are separated by semicolons. Such a sequence can have an expression as its final element instead of a statement, and thus the entire sequence can be used as an expression. This is most often seen as the body of a function. Note that this can only happen where specifically indicated - it is not legal to replace any arbitrary expression with a sequence of statements and an expression. This is trivial to implement, but I deliberately did not do so, because of the confusion it can cause. AmigaMUD does not have any constructs which only accept a single statement as part of them, and thus it does not have any problem with "dangling else"'s. All constructs are fully bracketed with reserved words, hence there are no "begin"/"end" or "{"/"}" brackets needed. The 'if' Construct The AmigaMUD programming language has a standard set of language constructs, including 'if's, 'while's, 'for's and 'case's. 'if's and 'case's can be used as both statements and expressions, i.e. can return a value or not return a value. An 'if' construct consists of: - 'if' - a bool expression (the condition) - 'then' - statements/expression to execute if condition is true - zero or more of: - 'elif' - a bool expression (the condition) - 'then' - statements/expression to execute if condition is true - optional: - 'else' - statements/expression to execute if all conditions are false - 'fi' A simple example of an 'if' is: if flag then Print("Flag is true.\n"); fi; A more complex 'if' statement: if a <= b and not flag2 then if a = b then Print("Found!\n"); else Print("Not found yet.\n"); fi; elif a <= b or not flag2 then Print("Partly found.\n"); else Print("No result.\n"); fi; Note that 'if' constructs can be nested. This is true in general of the programming language - there are no limitations other than memory available (nesting of constructs is limited only by the available stack space - the required space is sufficient for a lot of nesting). 'if' expressions can be used like this: max := if b > a then b else a fi; An 'if' expression must always have an 'else' part, since there must always be some value yielded. The various branches of an 'if' expression must all yield the same type of value. The branches of an 'if' expression can have statements preceeding the final result, all separated by semicolons. E.g. result := if a < b or b < c then Print("first case\n"); a := b; c elif a < b then Print("second case\n"); b := a; c else Print("third case\n"); a := b; c := b; a fi; This kind of construct works fine, but can be a little confusing, so they should be used with care. Such large 'if' expressions are most often used as the bodies of functions that return a result which conditionally depends on something. The 'while' Construct A 'while' statement consists of: - 'while' - a bool expression (the condition) - 'do' - the loop body statement-sequence - 'od' A 'while' loop is executed repeatedly until the condition yields false. A 'while' loop does not return any value, i.e. it yields 'void'. The condition can have statements before the final 'bool' value, thus yielding a loop with its exit test in the middle. E.g. i := 10; while i := retrieveValue(i); i ~= 0 do processValue(i); od; Here, the sequence of execution will be: i := retrieveValue(10); /* lets say this returns 8 */ processValue(8); i := retrieveValue(8); /* lets say this returns 3 */ processValue(3); i := retrieveValue(3); /* lets say this returns 0 */ and 'i' will be 0 after the 'while' loop. Programmers should use care when using 'while' loops, since it may not be obvious when the loop exits. The AmigaMUD server places an execution time limit on all execution, so an infinite loop will be aborted, but, depending on what SysAdmin has set that limit to, bad loops can have serious effects on the performance of the server for other users. Also, aborting execution can leave wizard-created data structures in an inconsistent state. The 'for' Construct A 'for' statement consists of: - 'for' - local int variable name - 'from' - int expression (the start value) - 'upto' - int expression (the limit value) - 'do' - the loop body statement-sequence - 'od' Like a 'while' loop, the 'for' loop does not return any value. The start and limit expressions are evaluated once at the beginning of the loop, and then the int variable is stepped by ones from the start value upto the limit value, with the loop body executed once for each such value. If the limit value is less than (signed integer comparison) the start value, then the loop body is never executed. 'for' loops are useful for stepping over fixed ranges, or through the entries of a list, as in: GSetPen(nil, C_BLACK); for i from 1 upto 10 do GAMove(nil, i * 2, 30); for j from 1 upto 20 do GRMove(nil, 0, 1); GRDraw(nil, 0, 1); od; od; sum := 0; for j from 0 upto Count(listOfThings) - 1 do sum := sum + listOfThings[j]@intProperty; od; Print("Sum of values = "); IPrint(sum); Print(".\n"); When using a 'for' loop to scan down a list, make sure that code executed in the body of the loop cannot modify the list itself. If it can, you must use a 'while' loop, since the 'Count' of the elements in the list will be changing. The 'case' Construct The 'case' construct is in some ways a generalization of the 'if' construct. In other ways it is less general. It consists of: - 'case' - int expression (the selector) - one or more "case alternatives", which are: - 'default' - ':' - the alternative statements/expression or - a sequence of "case indexes", which are: - 'incase' - integer constant - ':' - the alternative statements/expression - 'esac' Only one 'default' alternative can occur in any given 'case', and if the 'case' is a 'case' expression, a 'default' alternative must occur. Some examples: case whichButton incase LEFT_BUTTON: doMove(MOVE_LEFT); lastDirection := MOVE_LEFT; incase RIGHT_BUTTON: doMove(MOVE_RIGHT); lastDirection := MOVE_RIGHT; incase EXIT_BUTTON: incase LEAVE_BUTTON: incase OUT_BUTTON: doMove(MOVE_EXIT); lastDirection := MOVE_EXIT; default: if lastDirection ~= -1 then Print("You can't go that way.\n"); lastDirection := -1; else Print("You still can't go that way.\n"); fi; esac; result := case retrieveThing()@intProperty incase 0: 1 incase 1: 20 default: Print("Illegal value encountered!\n"); -1 esac; C programmers are cautioned that AmigaMUD case alternatives do not fall through to the one beneath them. All 'case expressions' must have a 'default' part, since some value must always result. 'case statements' need not have one, and if the selector does not match any of the case indexes, and the 'case' has no 'default' alternative, no action is taken. Function Calls Function calls, whether to a builtin or to a user-defined function, consist of the name of the function followed by a left parenthesis, a comma separated list of the function parameters, and a right parenthesis. The parentheses must be given even if the function has no parameters. If no parentheses are given after a function name, then the function itself is the value, with type 'action'. All function parameters must be given, and must be of the same type as required by the function header. If the function has a return-type of 'void', then the function call itself yields 'void', i.e. it is a statement. Otherwise, the function call yields the type of the function result. Examples: Assume: proc f1(int i, j)int proc f2(string s1, s2)string proc f3(int i, string s)void Then: f3(f1(6, j + 7), f2("hello", "there") + "world"); If the function to be called is not known until run time, then the above syntax cannot be used, since the result type of the function is not known. Instead, the 'call' construct can be used. This form consists of: - 'call' - '(' - action expression (returns the function to call) - ',' - the expected result type of the action - ')' - '(' - the parameters for the function call - ')' Since the expected result type is given explicitly, the system can assume that type at "compile" time, and can check for it at run time. The parameter count and types of the called function will always be checked at run time. Examples: Print(call(Me()@p_pDescAction, string)() + "\n"); i := i + call(if wantMax then max else min fi, int)(j, k); Miscellaneous Constructs Sometimes a function or a builtin yields a result that is not always wanted - the call is being done for its side effects. In these cases, it can be desireable to make it perfectly clear that the result is being discarded, so, instead of assigning the result to some dummy variable, the 'ignore' construct can be used. It consists of the reserved word 'ignore' followed by any expression whose result is to be discarded. 'ignore' always returns 'void'. E.g. ignore FindName(Me()@p_pCarrying, p_oName, "bottle"); theBottle := FindResult(); As mentioned previously, there are two kinds of comments in the AmigaMUD programming language. The first is the C-like one consisting of an opening /*, comment text, and a closing */. The second kind of comment is the 'note', which consists of all of the characters after the 'note' keyword up to the end of the line. A 'note' comment is stored in the database and will appear when the function containing it is printed. For example: public proc complicated(thing th)void: note We are doing something complicated here, so be careful! if th@flag then ... else note flag not set, so don't try the tricky stuff. Print("The easy stuff!\n"); fi; corp; It is not necessary to put a semicolon after a note - they delimit themselves, so the parser can recognize them. The AmigaMUD system has limited support for direct, unnamed actions. These are values of type 'action' and can be assigned and called. They are typically only used in specialized circumstances, such as one-shot actions produced by the "StringToAction" builtin. They must have return type 'status', and consist of: - 'proc' - optional body statements - status result expression - 'corp' For example, it is legal to do: myThing@actionProp := proc Print("Hello there world!\n"); succeed corp; ignore call(myThing@actionProp, status)(); Such procs have no symbol, so are usually less useful than normal functions. Also, the forced 'status' result and lack of parameters or local variables are a limiting factor. This facility may be generalized in a future release, although there does not seem to be much need for it. The most common construct in the AmigaMUD programming language is the assignment statement. Assignment statements consist of: - - ':=' - Assignment statements do not return any value, hence the concept of "nested assignments" does not exist. Several different kinds of 's are possible: - local variable or parameter name or - - '[' - - ']' or - - '@' - The first variant is the obvious one of assigning a new value to a local variable or parameter. The second is that of assigning a new value to a specific element of a list. Note that the element indexed by the must already be present in the list, else a run-time indexing error will occur. Such indexing starts with 0 as the first index, and "Count() - 1" as the last index. The third form is used to assign a value to a property on a thing. The property does not need to already exist - this method is the method used to add new properties also. Note that there are no global variables in AmigaMUD - values needed outside of a single function must be stored as properties attached to some thing. Example assignment statements (all are of integer values, but the same rules hold for any type of value): private th CreateThing(nil). private intProp CreateIntProp(). private listProp CreateIntListProp(). private proc testProc(int n)void: int i; list int li; i := 10; n := 100; li := CreateIntList(); AddTail(li, 10); Addtail(li, 20); li[0] := 1; li[1] := 2; li(otherFunc()] := 6; th@intProp := 7; th@if i < 2 then intProp else otherIntProp fi := 8; th@listProp := li; th@listProp[1] := 9; call(th@thingProp@actionProp, list int)()[n] := i; corp; Properties can be removed from things using the '--' construct: - - '--'; - This construct is a statement - it does not return any value. Note that it is not an error to try to delete a property from a thing when that property does not exist on that thing. Examples: th1--intProp; thingFunc() -- thingPropFunc(); Expressions Many examples of expressions have already been seen. This section will simply list the full set of operators, in order of decreasing precedence. The precedence of an operator is an indication of how strongly it binds to its operands. A simple example is the following expression: 2 * 4 + 6 * 8 The value of this expression is 56, the sum of 2 * 4 and 6 * 8. This is because the multiplications are done before the addition. The multiplication operator, '*', has higher precedence than the addition operator, '+'. The evaluation order of an expression can be changed by the use of parentheses around a subexpression, as in: 2 * (4 + 6) * 8 which has value 160, the product of 2, 4 + 6, and 8. So, for the operators in the following descriptions, those described first will be done before those described later, unless parentheses are introduced to change the order of evaluation. All expressions must start with bottom-level items. These are: 'if'- expression, 'case'-expression, function call result, inline action, parenthesized sub-expression, list reference, property reference, identifier, string constant, integer constant, or any of the reserved words 'false', 'true', 'succeed', 'fail', 'continue', 'nil', 'ts_private', 'ts_readonly', 'ts_wizard', 'ts_public'. 'if'- expressions, 'case'-expressions, function calls, inline actions and parenthesized sub-expressions have all been covered previously. Similarly, the bottom-level items were explained in the section on lexical entities. A list reference used as an expression looks exactly like the left- hand-side of an assignment to a list element. The same rule holds - the indexed element must exist in the list. A property reference also looks just like the corresponding assignment left-hand-side. When a property is being searched for on a thing, it might not be found. If the thing has a parent thing (established when the thing is created), then the search will continue with that parent thing. Any value found on the parent will be used. Similarly, if the value is not found on the parent, then the parent's parent will be searched, etc. This "inheritance" of properties can be used to save considerable space in the database, and to save a lot of effort when creating new things which are all similar. Note that things can only have a single parent - AmigaMUD does not have "multiple inheritance". Good examples of the use of inheritance are the monsters in the Proving Grounds in the standard scenario. Each monster has a model, defined in the file "monsters.m", and when examples of that monster are needed, they inherit most of their properties (name, description, actions, speed, armour class, special actions, etc.) from the model. Only values which need to be different (such as current hit points) are stored on the specific instance. The fact that property assignment only assigns to the descendant thing makes this use automatic. A tricky use of inheritance can occur with things which inherit from an ancestor, as in: private ancestor CreateThing(nil). private child CreateThing(ancestor). private intProp CreateIntProp(). ancestor@intProp := 100. ... child@intProp := child@intProp - 1; if child@intProp = 0 then child -- intProp; fi; This assignment statement will get the 100 value from the ancestor thing the first time it is executed, and will add the property with value 99 to the child. On successive executions, it will modify the property on the child. When the value reaches 0, the property is deleted, and will again inherit the 100 from the ancestor. If a property which is not present on the thing is referenced, the value yielded depends on the type of the property: status - fail bool - false int - 0 string - "" (an empty string) thing, action, grammar, list - nil This defaulting of values is usually useful, but can occasionally be a bit of a nuisance. The main use is to save storage - the programmer can count on these values for missing properties, and hence can arrange to not store them explicitly. This works quite well for flag values. Unary Negation: - This operator appears before an int expression and negates the value of the expression. E.g. -6 -(intvar * 7) -th@func(7, -6) Bitwise And: & Bitwise Exclusive-Or: >< Bitwise Shift Left: << Bitwise Shift Right: >> These operators all operate on int values. They all have the same precedence, so are evaluated left-to-right when used together in an expression. The Bitwise And operator combines two int values in a bit-by-bit fashion - each of the 32 bits of the result is a '1' bit only if both of the corresponding bits in the operands were also '1' bits. The Bitwise Exclusive-Or operator yields a '1' bit in the result only if the corresponding bits in the operands are different. The Shift-Left operator shifts its left-hand operand left by the number of bits specified in its right-hand operand. Similarly, the Shift-Right operator shifts its left-hand operand right by the number of bits specified in its right-hand operand. If the right-hand operand to a shift operator is negative, it is not defined what the result will be. Also, if the right-hand operand is greater than 32 (the number of bits in the left-hand operand), the result is not defined. E.g. 0b1100 & 0b0101 => 0b0100 0b1100 >< 0b0101 => 0b1001 0b001100 << 2 => 0b110000 0b001100 << 3 => 0b1100000 0b001100 >> 2 => 0b000011 a & b >< c << d >> e == ((((a & b) >< c) << d) >> e) Bitwise Inclusive-Or: | This operator requires two int operands and returns an int result. Each of the 32 bits in the result is a '1' if the corresponding bit in either of the operands is a '1'. E.g. 0b1100 | 0b0101 => 0b1101 a & b | c << d | e == (a & b) | (c << d) | e Integer Multiplication: * Integer Division: / Integer Remainder: % These operators take a pair of int operands and yield an int result. Division or remainder by zero will be trapped at runtime. Integer Addition: + Integer Subtraction: - String Concatenation: + Note that both integer addition and string concatenation have the same operator symbol. The operations are distinguished by the types of their operands. E.g. 6 + 128 => 134 6 - 128 => -122 "hello" + "world" => "helloworld" "hello " + "world" => "hello world" "" + "" => "" Integer Comparisons: <= < = ~= > >= String Comparisons: <= < = ~= == > >= Other Comparisons: = ~= All comparisons yield a bool value. All comparisons must have operands which are both of the same type. The integer comparisons are 32 bit signed integer comparisons. The string comparisons use comparisons based on the ASCII values of the characters in the strings. The '==' operator converts all letters to upper case (or lower case if you prefer!) before doing the comparison. It is useful when dealing with user input that might be capitalized. Things, actions, lists, properties, etc. can be compared for equality or inequality. E.g. 6 < 12 => true -6 < -12 => false "hello" = "hello" => true "hello" <= "hello" => true "hello" = "Hello" => false "hello" == "Hello" => true Logical Not: not This prefix operator reverses the logical value of its bool operand. E.g. not true => false not false => true not 6 < 10 => false Logical And: and This operator takes two bool operands and returns a bool result that is true only if both operands are true. Technically, this is a language construct rather than a true operator, since the AmigaMUD interpreter will not even try to evaluate the right-hand operand if the left-hand operand evaluates to false, since it knows that the right-hand operand will not affect the final result. This behaviour is part of the language definition and will not change; thus the programmer is correct to write things like: th ~= nil and th@field = 2 Logical Or: or This operator takes two bool operands and returns a bool result that is true if either of its operands is true. Similar to the 'and' operator, the 'or' operator will not evaluate its right-hand operand if its left-hand operand is "true". Further Reading This document has informally defined the AmigaMUD programming language. This information allows wizards and apprentices to write and run valid AmigaMUD programs, but it has not given enough information to allow them to write meaningful programs, or programs that fit in with the supplied standard scenario. Further documents relevant to programming are: ProgConcepts.txt - discusses some classes of builtin functions and how to use them. This includes parsing, effects handling, graphics, character manipulation, etc. Builtins.txt - this is a reference manual for the builtin functions. It lists and describes all of the builtins, in alphabetical order. Scenario.txt - this document is a rambling discussion of how the standard scenario is set up, the utility functions it provides, how to build from it, and how to change how it works.